When something goes wrong with the wiring in a Fobes Hill home, the first question is usually the same: who can actually come out and fix it. We handle residential and rural electrical work throughout this part of Snohomish County, from straightforward repairs to full panel replacements and rewiring projects on older properties.
Call (425) 699-4653 and we'll scope the job on the phone, confirm a price, and get the visit scheduled. We're available every day from 7:30 AM to 10:30 PM.
Fobes Hill is a small town with the kind of housing stock that generates real electrical work. Homes here tend to be older, on larger lots, with outbuildings, wells, and wiring that was installed in stages over the years. We work with property owners and landlords who need the job done properly, not patched. We handle the full scope, from a single dead outlet to a complete rewire.
Multi-unit properties in a town this size often blur the lines between what is inside your unit and what is shared. In an apartment or condo, the panel that serves your space is usually inside the unit or in a common area nearby. Breakers that trip inside your unit are yours to deal with. The service entrance, the meter base, and the wiring feeding common areas belong to the building.
When something goes wrong, it helps to know which side of that line the problem is on before you call. If the fault is inside your unit, we can scope it and schedule a visit. If the issue is upstream of your unit, that conversation starts with the building owner or property manager. We can help you figure out where the fault is, and if it turns out to be on the building side, we work with landlords and property managers directly.
A panel inside a unit that keeps tripping on a specific circuit is usually pointing at something on that branch. A panel that runs warm, has breakers that feel loose, or shows signs of corrosion at the connections is a different problem. We assess the panel as part of every visit where it is accessible, and we explain what we find before quoting any work.
Some older multi-unit buildings were wired with circuits that cross unit boundaries in ways that were never properly documented. If you are losing power on a circuit and the breaker in your unit is fine, the problem may be upstream or in a shared run. That is worth a call to find out.
Older homes in this part of Snohomish County were built with wiring methods that made sense at the time and create real problems now. Knob-and-tube wiring, which used separate hot and neutral conductors run through ceramic insulators, lacks a ground conductor entirely. That is not a cosmetic issue. Modern appliances, GFCI protection, and surge devices all depend on a proper ground path to function correctly.
Not all older wiring has to come out immediately. A home that has been maintained, that has not been buried under insulation, and that is not being asked to carry loads it was never designed for can sometimes be assessed and left in place in sections. What cannot be left in place is wiring that has been spliced incorrectly, buried in a wall cavity without a junction box, or run through areas where heat or moisture have damaged the insulation.
Aluminum branch-circuit wiring from a later era carries its own set of concerns at connections and outlets. The conductors themselves are not the problem. The connections are, because aluminum and copper expand and contract at different rates and the fittings used at the time were not always rated for aluminum. Remediation at each connection point, using the correct fittings, is the standard approach. A full replacement is sometimes the right call depending on the scope and the condition of the existing runs.
Every job is priced from the scope, and the scope is built on the phone before a visit is booked. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote up or down.
A single outlet replacement is a short conversation. A full rewire of a home with multiple outbuildings is a longer one. In both cases, the price is confirmed before anything is scheduled. If the work turns out to be more involved once we are on site, we explain why before going further.
We do not offer a free estimate as a standalone visit. The scoping happens on the call, and the visit starts from a confirmed price. Ask what the work involves when you call and you will get a straight answer.
A lot of the wiring in older homes in this area runs through spaces that were not designed for easy access. Attic runs, crawl space circuits, and junction boxes buried under insulation all add time to a job. We account for that in the scope. If reaching a fault or running a new circuit requires working in a confined space, that gets noted when the job is scoped, before anything starts.
Ceiling fan installation and recessed lighting in rooms with tall ceilings, or exterior fixtures mounted high on a roofline, require more than a standard step ladder. We plan for the access equipment the job needs. If a fixture is in a location that changes how the work gets done, say so when you call and we will scope it correctly. Details on each of these are on our page of electrical services.
A new appliance, a hot tub, or a workshop tool that draws serious current needs its own dedicated circuit. Sharing a circuit with other loads causes nuisance trips and, in some cases, creates a wiring condition that does not meet current code. We run the circuit from the panel, size the wire and breaker correctly for the load, and install the outlet the equipment calls for.
A full rewire replaces the branch-circuit wiring throughout the home, updates the panel to match, and brings the whole system to current code. A partial rewire targets specific areas where the existing wiring is unsafe or inadequate while leaving sound runs in place. Load calculations are part of both conversations, so the panel is sized for what the home is actually running.
Battery-operated detectors are a starting point, not a complete solution. Hardwired smoke and CO alarms with battery backup stay active even when power is interrupted, and interconnected units ensure that a detector in one part of the house triggers every alarm in the home. We wire and install these as part of a new build, a rewire, or as a standalone upgrade.
Properties in a rural town this size frequently have a well pump, an irrigation system, or both. These loads need dedicated circuits sized for the motor draw, not shared runs. A well pump that loses power during a storm because it shares a circuit with something else is a problem worth preventing. We assess the existing circuit, confirm the panel has capacity, and wire the dedicated run correctly.
Recessed lighting, LED retrofits, and new fixture wiring change how a room functions without a major construction project. We handle new fixture installation, can light placement, and under-cabinet wiring for kitchens and workspaces. If the ceiling has no existing wiring at the fixture location, we run the circuit and install a proper box before the fixture goes in.
When you call, a real person answers. The scope is worked out on the call, the price is confirmed, and the visit is booked from there. We're available every day from 7:30 AM to 10:30 PM, including weekends, so a problem that shows up on a Saturday does not have to wait until Monday.
For faults that cannot wait, describe what you are seeing when you call and we will assess how quickly it needs to be addressed. A burning smell near an outlet, a breaker that trips immediately on reset, or a sparking switch all qualify as urgent. We take those calls within our daily hours and get them on the schedule accordingly.
If the property has a tenant or a business that needs to stay operational, say so when you call. We work out what the visit requires and plan around it. The job does not have to mean a full shutdown if the fault is on a single circuit.
We handle electrical work throughout this part of Snohomish County. Along with Fobes Hill, we cover Snohomish, Bunk Foss, Cavalero, Eastmont, and the surrounding area.
If you are unsure whether your address falls within the area we serve, call (425) 699-4653 and we will confirm it on the call.
Some outdoor work can be affected by heavy rain or wet conditions, particularly where connections need to be made in open junction boxes or trenching is involved. We discuss the weather situation on the call if it is a factor and reschedule if conditions make the work unsafe.
Yes. Well pump circuits are a regular part of the work we do on rural residential properties in this area. We assess the existing circuit, confirm the panel has the capacity to support the pump's load, and wire the dedicated circuit correctly. If the panel needs an upgrade to carry it, we scope that alongside the pump circuit so everything is sized from the start.
The framing needs to be complete and the area needs to be accessible before rough-in wiring can be run. We confirm the readiness of the site on the call and coordinate the timing with whoever is managing the build schedule.
Yes, in most cases we can scope the job and give you a price on the call. Describe what you are seeing or what you need done, and we will work through it with you before anything is scheduled.
A pre-purchase electrical inspection gives you a clear picture of what the wiring looks like before you commit to the property. We look at the panel, the branch circuits, and any visible wiring conditions that would need to be addressed. You get a straightforward account of what is there, what it means, and what remediation would involve, so you can make an informed decision.
A dryer runs on a dedicated 240-volt circuit, which requires two hot conductors, a neutral, and a ground, along with a 30-amp breaker and the correct four-prong outlet. A standard 120-volt outlet cannot support it, and sharing a circuit with other appliances is not a safe option.
That depends on what the panel is actually carrying versus what it is rated for. A panel that looks full at a glance often has room for an additional circuit once we run a load calculation. If there is no room, a subpanel or a service upgrade may be the right path. We assess capacity on the call and confirm the approach before scheduling the visit.
Call (425) 699-4653 to reach Everett Electrical Company.
Describe the fault or the project, and we'll scope it on the call and confirm a price before anything is scheduled. Every visit ends with the work tested, the site tidied, and nothing left for you to deal with after we're gone.
Call now. Get it scoped. Get it wired to code.
Just as close, we take electrical work in: Snohomish, Bunk Foss, Eastmont, Lake Stevens. Have a look at our complete list of towns.
We handle the full range of residential and commercial electrical work in Fobes Hill and across Snohomish County. Every job starts the same way: you call, describe what you are seeing, and we scope the work and give you a price before anything is scheduled. The table below lays out what each service covers, who it fits best, and a practical note to help you decide where to start.
| Service | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Breaker & Fuse Repair | Worn breaker replacement, Fuse box troubleshooting, Breaker that trips under normal load, Double-tapped breaker correction | Any property where a breaker repeatedly trips or a fuse blows without an obvious overload | A breaker that trips under a normal load is often worn past its useful life, not a sign of a wiring problem elsewhere. We confirm which it is before replacing anything. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrade, Fuse box to breaker panel replacement, Subpanel installation, Load calculation and service-entrance work | Homes adding an EV charger, major appliance, or battery system that the existing panel cannot support | Panel upgrades typically require a permit and utility coordination. We handle that side of the process so the work is inspected and the utility reconnect goes smoothly. |
| Ceiling Fan Installation | Fan replacement on existing wiring, Fan added to room with no existing wiring, Fan-rated box installation, Switch and remote wiring | Bedrooms and living spaces where no ceiling wiring currently exists | Adding a fan to a room with no existing ceiling wiring requires running a circuit and installing a fan-rated box. We assess what the existing wiring supports before quoting. |
Call (425) 699-4653 and we will scope the job on the phone, give you a straight answer about your panel and wiring, and confirm the price before anything is scheduled.
(425) 699-4653